Currencies:
USD
0
Home>Power Inverter/Inverter Charger>Inverter Charger>Pro-line Inverter Charger 3KW 5KW 6KW 8KW
Pro-line Inverter Charger 3KW 5KW 6KW 8KW

Pro-line Inverter Charger 3KW 5KW 6KW 8KW Item NO.: PTS

Write a Review
US$ 1160.00
Power
3KW 5KW 6KW 8KW
Quantity
Stock ( 299 )

Copy and share this link on social network or send it to your friends

Copy
  • Pure sine wave output for sensitive and motor loads
  • Perfect management and limitation of AC sources
  • Power shaving of the consumption peaks
  • Auto switch between utility AC and battery within 15 millisecond as U.P.S
  • Manual switch priority power source between battery and utility AC
  • RS232 available. Monitoring software included
  • High power factor up to 1, excellent efficiency and overload
  • Compatible with AC coupling
  • Max. 9 units stacking use to get Max. 72KW output power
Product Name Pro-line Inverter Charger 3KW 5KW 6KW 8KW
Item NO. PTS
Weight 34 kg = 74.9572 lb = 1199.3147 oz
Category Power Inverter/Inverter Charger > Inverter Charger
Tag inverter charger , solar inverter charger
Brand Popsail
Creation Time 2020-11-03

Popsail PTS power cube series provides unmatched freedom of use due to its many functions. In a basic application, it offers a total package: the functions of inverter, battery charger, transfer system and assistance to the source. These functions can be combined and controlled in a totally automatic way for exceptional ease and optimal management of available energy.

The PTS is equipped with a command entry and 2 configurable auxiliary contacts. This allows automatic control of a genset or loadshedding when the battery voltage is too low. The flexibility obtained makes it possible to implement special functionalities, often necessary for good energy management in standalone systems.

The PTS series offers an optimal use of all sources that can be found in hybrid systems, whatever their connecting mode (AC or DC bus), up to the nominal power of the Xtender system (single, parallel and/or three phase).

Function Smart-Boost and active filtering
With this function it is possible to interact directly with the AC source (Genset or grid) and to implement some basic functions such as:
• Efficient and immediate limitation of the current of the source, including non linear or inductive/ capacitive loads, protecting efficiently the breakers during connection to shore power or to a camping power meter with limited current (function of power shaving and power assistance)
• Power shaving of load steps on the generator allowing an optimal sizing of the generator and asssuring the best possible efficiency of the fossil fuels (function of filtering and of power assistance).

The function of assistance to the source enables also to implement advanced functions such as the priorityuse of renewable energy, even when the grid is available






Specification

Model PTS3000-212 PTS5000-224 PTS6000-248 PTS8000-248
Rated Power
3000VA 5000VA 6000VA 8000VA
Continuous Power(@-10~50℃)
2500VA 4500VA 5000VA 7000VA
Peak Power
7500VA 12000VA 15000VA 21000VA
Rated DC Input
12VDC 24VDC 48VDC 48VDC
Battery Charge Current
160Amp 140Amp 100Amp 120Amp
Battery Type
Lead acid, AGM, Gel, Lithium
AC Input Voltage Range
9.5~17.0VDC 19.0~34.0VDC 38.0~68.0VDC 38.0~68.0VDC
AC Input Frequency
45~65Hz
AC Output
230VAC ± 2% / 120VAC
Output Frequency
50/60 Hz
Switch Time
15 ms
Efficiency
93% 94% 96% 96%
Max Bypass Power
3000VA 5000VA 6000VA 8000VA
Lead detection(standby) 2~25W

Power 30 mins.

3000VA 5000VA 6000VA 8000VA
Power 5 sec. 7500VA 12000VA 15000VA 21000VA
Standard Consumption 14W 18W 22W 24W
Dimension 230×300×500 mm
Weight 34 kg 40 kg 42 kg 46 kg


Featured Functions:

1. Inverter, charger and transfer switch. The PTS basically works as an inverter and as a charger, combined with a transfer relay.

PTS inverter charger-function 1-work as inverter charger and transfer relay


2. 2 or 3 units in parallel on 1 phase. Increase the power on one phase by putting 2 or 3 PTS in parallel.

PTS inverter charger-function 2-2 or 3 units in parallel to increase power


3. 3-phase In and 3-phase Out. Three-phase source for a three-phase power supply.

PTS inverter charger-function 3-3 phase in and 3 phase out parallel


4. 1 phase In and 3-phase Out. Three-phase power supply from a single phase source.

PTS inverter charger-function 4-1 phase in and 3 phase out parallel


5. 3-phase with  one reinforced phase. Three-phase power supply with increase of the power on one phase by setting 2 or 3 PTS in parallel on this phase.

PTS inverter charger-function 5-3 phase with one reinforced phase


6. 3 CTS in parallel on 3 phases. Three-phase power supply with 3 PTS on each phase; for power up to 72kW.

PTS inverter charger-function 6-3 CTS in parallel on 3 phases










No related record found